《工具箱-SVN》SVN安装、备份、迁移教程

:2023年12月22日 CSDN
分享到:

文章主要介绍了如何在服务器上搭建SVN,并提供了安装、配置、备份和迁移的详细步骤。在服务器上使用SVN进行版本控制,可以实现文件的版本管理和同步,提高工作效率。

文章目录

  • 一、服务器搭建SVN

  • 5.1 vim authz

  • 5.2 vim passwd

  • 5.3 vim svnserve.conf

  • 1.检查SVN是否存在

  • 2.安装SVN

  • 3.创建版本库

  • 4.创建版本库存放文件地址

  • 5.修改配置文件

  • 6.启动并查看SVN

  • 7.SVN Checkout

  • 8.SVN Update

  • 9.SVN Commit

  • 二、SVN-无法连接主机,目标计算机积极拒绝,无法连接

  • 1.检查SVN进程

  • 2.手动启动SVN

  • 3.重新尝试使用SVN

  • 三、SVN备份、迁移

  • 1.将源SVN版本库文件备份

  • 2.将备份文件发送到新的服务器

  • 3.在目标服务器的SVN中创建版本库存放文件地址

一、服务器搭建SVN

1.检查SVN是否存在

[root@hadoop_zxy ~]# svn -version-bash: svn: command not found12

2.安装SVN

[root@hadoop_zxy ~]# yum install subversionLoaded plugins: fastestmirror, langpacks

Installed:

 subversion.x86_64 0:1.7.14-16.el7

Dependency Installed:

 gnutls.x86_64 0:3.3.29-9.el7_6        neon.x86_64 0:0.30.0-4.el7                    nettle.x86_64 0:2.7.1-9.el7_9

 pakchois.x86_64 0:0.4-10.el7          subversion-libs.x86_64 0:1.7.14-16.el7        trousers.x86_64 0:0.3.14-2.el7

Complete!12345678910

3.创建版本库

[root@hadoop_zxy apps]# mkdir /zxy/apps/svn[root@hadoop_zxy apps]# lselasticsearch-6.5.3  jdk1.8.0_311  kafka_2.11-1.1.1  kibana-6.5.3  scala-2.11.8  svn  zookeeper-3.6.3[root@hadoop_zxy apps]# cd svn1234

4.创建版本库存放文件地址

[root@hadoop_zxy svn]# svnadmin create /zxy/apps/svn/repositories1

5.修改配置文件

5.1 vim authz

新增以下部分:
[/]
用户名= rw

[/] 表示控制的路径是全部,用户名自定义, rw 表示的权限 可读写

[aliases]# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average[groups]# harry_and_sally = harry,sally# harry_sally_and_joe = harry,sally,&joe# [/foo/bar]# harry = rw# &joe = r# * =# [repository:/baz/fuz]# @harry_and_sally = rw# * = r#[/]用户名 = rw

~12345678910111213141516171819202122232425

5.2 vim passwd

新增以下部分:
用户名 = 密码

用户名和密码处自定义

[users]# harry = harryssecret# sally = sallyssecret#用户名 = 密码

~1234567

5.3 vim svnserve.conf

释放并修改以下部分
anon-access = none
auth-access = write
password-db = passwd
authz-db = authz
realm = repositories

### This file controls the configuration of the svnserve daemon, if you### use it to allow access to this repository.  (If you only allow### access through http: and/or file: URLs, then this file is### irrelevant.)### Visit http://subversion.apache.org/ for more information.[general]### The anon-access and auth-access options control access to the### repository for unauthenticated (a.k.a. anonymous) users and### authenticated users, respectively.### Valid values are "write", "read", and "none".### Setting the value to "none" prohibits both reading and writing;### "read" allows read-only access, and "write" allows complete### read/write access to the repository.### The sample settings below are the defaults and specify that anonymous### users have read-only access to the repository, while authenticated### users have read and write access to the repository.anon-access = none

auth-access = write### The password-db option controls the location of the password### database file.  Unless you specify a path starting with a /,### the file's location is relative to the directory containing### this configuration file.### If SASL is enabled (see below), this file will NOT be used.### Uncomment the line below to use the default password file.password-db = passwd### The authz-db option controls the location of the authorization### rules for path-based access control.  Unless you specify a path### starting with a /, the file's location is relative to the the### directory containing this file.  If you don't specify an### authz-db, no path-based access control is done.### Uncomment the line below to use the default authorization file.authz-db = authz### This option specifies the authentication realm of the repository.### If two repositories have the same authentication realm, they should### have the same password database, and vice versa.  The default realm### is repository's uuid.realm = repositories### The force-username-case option causes svnserve to case-normalize### usernames before comparing them against the authorization rules in the### authz-db file configured above.  Valid values are "upper" (to upper-### case the usernames), "lower" (to lowercase the usernames), and### "none" (to compare usernames as-is without case conversion, which### is the default behavior).# force-username-case = none[sasl]### This option specifies whether you want to use the Cyrus SASL### library for authentication. Default is false.### This section will be ignored if svnserve is not built with Cyrus### SASL support; to check, run 'svnserve --version' and look for a line### reading 'Cyrus SASL authentication is available.'# use-sasl = true### These options specify the desired strength of the security layer### that you want SASL to provide. 0 means no encryption, 1 means### integrity-checking only, values larger than 1 are correlated### to the effective key length for encryption (e.g. 128 means 128-bit### encryption). The values below are the defaults.# min-encryption = 0# max-encryption = 256123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263

6.启动并查看SVN

[root@hadoop_zxy conf]# svnserve -d -r /zxy/apps/svn/[root@hadoop_zxy conf]#  netstat -apn | grep 3690tcp        0      0 0.0.0.0:3690            0.0.0.0:*               LISTEN      7757/svnserve1234

7.SVN Checkout

用于初次下载项目

djEvTnpCS05FWnRvblZCc1JrZzRZYlJMSUs3NGQyemg1emEyOEJ5cUxtUTZZZ2pZQXVVLUdaRml2N1U4TnM2aEFxLTJQaHg0YWNBNnl5cERpVFRNVzA3bFZBRjQ1ZDFwUFhPNkpTMW92VWFlakE9.png

8.SVN Update

用于更新项目内容

djEvV2ZSYnc3MVdlb3ltc2VGRnN5MW9DVG5xSFVFZ2hVNHhrNDBfZVZNRWtMSnBPRWo1dFVDVHJSdUxhb2VDeTFGeHo1TENJWGwwSEVGdW5IXzBjT1k1dGxBRjQ1ZDFwUFhPNkpTMW92VWFlakE9.png

9.SVN Commit

用于提交项目更改内容

djEvQ1ZHd2NlUTlZM1F0RjlHbkxWaGdMN3NkM20wR0NIUDRlNWtHTGFqZHNBVTEwV19oeFdxQ1VTMEE3aHY3TkJicllKdEk1SWppUTNDeHVZQzFQeDh0NUZBRjQ1ZDFwUFhPNkpTMW92VWFlakE9.png

二、SVN-无法连接主机,目标计算机积极拒绝,无法连接

djEvbXU5ekRaMEZXZF9XR0ZjVUZGMHZyVmJBT284NDJDQlVkbUFFUVJCRU43eU5MMzdIWnctaWlMZmp1QjVacGxwdGcyajdDTkV5b2U3dUlvMng1VGJLdmxBRjQ1ZDFwUFhPNkpTMW92VWFlakE9.png

1.检查SVN进程

发现SVN进程已经关闭,想起来前几天重启了一下服务器,SVN服务器没有设置开机自启

[root@hadoop_zxy ~]# ps -ef | grep svnroot      3652  2079  0 11:31 pts/0    00:00:00 grep --color=auto svn1234

2.手动启动SVN

[root@hadoop_zxy ~]# svnserve -d -r/zxy/apps/svn[root@hadoop_zxy ~]# ps -ef | grep svnroot      4690     1  0 11:33 ?        00:00:00 svnserve -d -r/zxy/apps/svn

root      4707  2079  0 11:33 pts/0    00:00:00 grep --color=auto svn[root@hadoop_zxy ~]#1234567

3.重新尝试使用SVN

djEvODY1NVFXdnMxUkliLXp4NGI3enVWWmZVWlJ0U1E1MkNMWGtDTi1haFRoSnFKSE1Nd0E1RnRmXzVkVHBQRENya2NtMWV5YlBScUw1TEN3Sy0xeHh6eFZBRjQ1ZDFwUFhPNkpTMW92VWFlakE9.png

注意:大家在重启服务器后,一定要记得查看SVN的进程

三、SVN备份、迁移

SVN需要备份,或者SVN服务器迁移,可以使用svnadmin的dump和load命令进行操作。

1.将源SVN版本库文件备份

svnadmin dump /zxy/apps/svn/old > dataproject1

2.将备份文件发送到新的服务器

scp /zxy/apps/svn/dataproject root@ip:/zxy/apps/svn1

3.在目标服务器的SVN中创建版本库存放文件地址

新创建的版本库文件地址,需要修改相关的配置文件,参考第一章即可

svnadmin create /zxy/apps/svn/new

svnadmin load /zxy/apps/svn/new < ./dataproject12

原文来源:https://blog.csdn.net/m0_51197424/article/details/135160854

[我要纠错]
文:宋聪乔&发表于江苏
关键词: 文章 目录 服务器 搭建 SVN5.1

来源:本文内容搜集或转自各大网络平台,并已注明来源、出处,如果转载侵犯您的版权或非授权发布,请联系小编,我们会及时审核处理。
声明:江苏教育黄页对文中观点保持中立,对所包含内容的准确性、可靠性或者完整性不提供任何明示或暗示的保证,不对文章观点负责,仅作分享之用,文章版权及插图属于原作者。

点个赞
0
踩一脚
0

您在阅读:《工具箱-SVN》SVN安装、备份、迁移教程

Copyright©2013-2024 JSedu114 All Rights Reserved. 江苏教育信息综合发布查询平台保留所有权利

苏公网安备32010402000125 苏ICP备14051488号-3技术支持:南京博盛蓝睿网络科技有限公司

南京思必达教育科技有限公司版权所有   百度统计

最热文章
最新文章
  • 卡尔蔡司镜片优惠店,镜片价格低
  • 苹果原装手机壳